switching torque converter?
Moderators: FORDification, 70_F100
-
- New Member
- Posts: 88
- Joined: Sun Mar 04, 2007 7:31 pm
- Location: Louisiana
switching torque converter?
Im buying a C4 trans, I have a C6 right now, but can i put the torque converter from my C6 in the C4? Also it says the C4 will fit 289-351 w/Small Bellhousing so it should fit a 240 right?
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
-
- New Member
- Posts: 88
- Joined: Sun Mar 04, 2007 7:31 pm
- Location: Louisiana
re: switching torque converter?
ok in searching for a new clutch do i go by engine or by trans.
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
-
- New Member
- Posts: 88
- Joined: Sun Mar 04, 2007 7:31 pm
- Location: Louisiana
re: switching torque converter?
i mean torque converter not clutch.
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
re: switching torque converter?
worlds,
Jeff
Im buying a C4 trans
You'll order one for the 240/C-4 that you're gonna get.do i go by engine or by trans
Jeff
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4