switching torque converter?

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
worldsmysterie
New Member
New Member
Posts: 88
Joined: Sun Mar 04, 2007 7:31 pm
Location: Louisiana

switching torque converter?

Post by worldsmysterie »

Im buying a C4 trans, I have a C6 right now, but can i put the torque converter from my C6 in the C4? Also it says the C4 will fit 289-351 w/Small Bellhousing so it should fit a 240 right?
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Post by fordman »

it will fit 240. i doubt the c4 and c6 converter will interchange though.
worldsmysterie
New Member
New Member
Posts: 88
Joined: Sun Mar 04, 2007 7:31 pm
Location: Louisiana

re: switching torque converter?

Post by worldsmysterie »

ok in searching for a new clutch do i go by engine or by trans.
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Post by fordman »

by the engine size.
worldsmysterie
New Member
New Member
Posts: 88
Joined: Sun Mar 04, 2007 7:31 pm
Location: Louisiana

re: switching torque converter?

Post by worldsmysterie »

i mean torque converter not clutch.
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Post by fordman »

transmisson kind
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

re: switching torque converter?

Post by basketcase0302 »

worlds,
Im buying a C4 trans
do i go by engine or by trans
You'll order one for the 240/C-4 that you're gonna get. :thup:

Jeff
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Post Reply