Bending ibeams for aligment
Moderator: FORDification
-
Fo-Mo-Co
- Preferred User
- Posts: 348
- Joined: Wed Jan 05, 2011 9:35 am
- Location: Indiana
Bending ibeams for aligment
So I found a shop that has the equipment to bend the beams. How much drop can you correct with beam bending?
"We don't want tradition. We want to live in the present and the only history that is worth a tinker's dam is the history we make today."
Henry Ford
Henry Ford
-
HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: Bending ibeams for aligment
About 2.25 inches... that's generally the distance between the I-beam and OE bumpstop... Prolly get up to 3 inches by cutting them down or going with shorter poly bumps..
Btw, get some good shocks.
Btw, get some good shocks.
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang