What did you do to YOUR bump today?

[HillbillyDelux]

ROLL PAN IS ON still need to get the ends welded to the bed an get some tag lights and paint on it.
I love it!

[marxtoys]

Drove it to town. Stopped at the store. Went out and the little cutie in the Pathfinder said she liked my truck.






sorry, no pix.

[91Bear]

Had a new tailshaft seal and pinion seal installed. That stopped the oil leaks. Also tracked down the fuel leak. The inline fuel filter was not tight enough. Fuel was pooling on top of the intake manifold. Not good. One spark from the distributor and kablooie! Whew.

Next: get rid of the slop in the shifter, fix the horn, tighten up the steering play, new clutch, new diff. spider gears and install one of those fancy lighting harnesses from 390 when he makes more.

Someday, I will get a brake booster installed or upgrade to disc brakes.

[big orange]

Put in a new front marker/turn signal socket, got the turn signals workin(i hate wiring) installed a new licences plate light, fixed my dome light, Took her up to the parts store and had everybody drooling then smoked the tires off when i left!! so all in all it was a good day

[austin]

ugg i sanded down some bondo hopefully monday it will be smoke grey

[FormerMarine1981]

Took off the old dinged up grille. Now it sits with no face because I refuse to use the old rusted speed nuts and bolts. Broke about 3 bolt heads and one j-nut even with letting it soak with PB Blaster...

[GSequoia]

Drove mine to the store this afternoon. Thought "maybe I should put gas in it," decided not to.

[big orange]

ROLL PAN IS ON still need to get the ends welded to the bed an get some tag lights and paint on it.
I love it!

What kind of roll pan did you use? i'm thinking of getting one .. do you have any pics?

[austin]

im not a big fan of roll pans but i think that lmc or npd has them

[austin]

Took off the old dinged up grille. Now it sits with no face because I refuse to use the old rusted speed nuts and bolts. Broke about 3 bolt heads and one j-nut even with letting it soak with PB Blaster...

tell me about it i hate those stupid j nuts so very much

you only broke one j nut wow you were doing good i think ive busted 15 of them removing my front end

[towtruckerfour]

Finally got the my wife's 70 F100 running again after changing the head gaskets and putting it back together. I couldn't get it to start. After process of elimination, it turned out the coil was bad. Todays entertainment will be putting the headliner and stereo back in my truck. Having no stereo sucks and my singing sucks.

[Kansas 72 Ford]

Installed the ashtray I got from a member here. Oil change, radiator flush,new plugs, and a new wheel cylinder on the front passenger side.

[hazelnut]

Started polishing the ports and chambers on my heads.

[flyboy2610]

Yesterday, loaded it up with bags of leaves for another trip to the landfill.
(I absolutely HATE that oak tree. Hopefully, next spring it will get cut down.)

[big orange]

Rewired my tail lights for the third time and still dont have rear turn signals