460 perches

[thebannister8]

Hi everyone. I have a 1967 f100 and I'm removing my 6 cylinder 240 and putting in a 460. Can I use the perches from my 240 or do I need to get a different kind. If I need to get a different kind are these the right perches that I need. Thanks

[basketcase0302]

thebannister8 » Sat Sep 03, 2016 6:04 pm
Hi everyone. I have a 1967 f100 and I'm removing my 6 cylinder 240 and putting in a 460. Can I use the perches from my 240 or do I need to get a different kind. If I need to get a different kind are these the right perches that I need. Thanks

I don't believe so. Maybe BobbyFord or someone else can back me up on this.
Here's the tutorial on the engine perches and mounts.
And I have a set of 460 mounts for sale if you need them, (the engine side-not the frame perches themselves).
Scroll down to the bottom to view the 460 mounts and perches.

http://www.fordification.com/tech/engine-perches.htm

[thebannister8]

Thanks for the information. I'll let you know if I need the parts.

[daveford72]

I used 390 perches and motor mounts when i installed a 73 429 in my 72 short bed.