f-350 coined 16 inch wheels
Moderator: FORDification
-
Faltura
- New Member
- Posts: 118
- Joined: Thu Sep 21, 2006 10:31 am
- Location: Tennessee, Gadsden
f-350 coined 16 inch wheels
I am looking for a set of 6 coined 16 inch one piece wheels for my 72 f-350
-
two-bit
- Blue Oval Fan
- Posts: 620
- Joined: Thu Jul 06, 2006 6:19 pm
- Location: Michigan, Ishpeming
Re: f-350 coined 16 inch wheels
Not sure if you know this....
Ford used that "coined " rim on duallies up into the early 80's '83 or '84 was the last year for them....maybe '85....maybe.
I got my set for my F-350 from an '81 F-350. They fit excellent.
I have also heard that dodge used a VERY similar rim on there duallies. Not sure the range of years.
Watch out for the 16.5 rims. They made a lot of those.
Came across a lot of 16.5's until i found my 16's.
Good luck.
Two-bit
Ford used that "coined " rim on duallies up into the early 80's '83 or '84 was the last year for them....maybe '85....maybe.
I got my set for my F-350 from an '81 F-350. They fit excellent.
I have also heard that dodge used a VERY similar rim on there duallies. Not sure the range of years.
Watch out for the 16.5 rims. They made a lot of those.
Came across a lot of 16.5's until i found my 16's.
Good luck.
Two-bit
Living life full throttle on the North Coast of America!!!
72' F-350, DRW, 360, NP435, Dana 70, 159" WB, P.S., P.B., 12' flatbed, 10,000 GVW.
72' F-350, DRW, 360, NP435, Dana 70, 159" WB, P.S., P.B., 12' flatbed, 10,000 GVW.