Do these discs look correct?
Moderator: FORDification
-
Bama Bill13
- New Member
- Posts: 17
- Joined: Wed Aug 28, 2013 1:14 pm
Do these discs look correct?
I got these from a buddy who does a lot of crown Vic swaps. I was told they'd bolt right up to my 71' so I assume they must be 73-74 discs. Take a look and let me know what you think.
You do not have the required permissions to view the files attached to this post.
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Do these discs look correct?
Kinda hard to tell without it being disassembled but looks about right. Here's a couple of photos of my '74 spindles and hubs. If you can get the king pins out, you can check them against this chart to be sure http://www.fordification.com/tech/Ibeamsspindles.htm
You do not have the required permissions to view the files attached to this post.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
Bama Bill13
- New Member
- Posts: 17
- Joined: Wed Aug 28, 2013 1:14 pm
Re: Do these discs look correct?
Awesome man, I appreciate the response and the pictures. Those look great! I'll get those pins out and see what I've got
-
HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: Do these discs look correct?
These two pics should provide enough info to determine which year range.....
