C6 shift rod
Moderator: FORDification
-
70shortbox
- New Member
- Posts: 158
- Joined: Fri May 20, 2011 2:53 pm
- Location: Santa Rosa, CA
C6 shift rod
I'm looking for the rod that goes from the column to the trans. Thanks
1970 F100 Custom Shortbed Styleside
460/C6
460/C6
-
Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
Re: C6 shift rod
Did you ever find one?70shortbox wrote:I'm looking for the rod that goes from the column to the trans. Thanks
Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
-
70shortbox
- New Member
- Posts: 158
- Joined: Fri May 20, 2011 2:53 pm
- Location: Santa Rosa, CA
-
Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
Re: C6 shift rod
I just built my own and so far I really like it.70shortbox wrote:No I did not. I still need it.
Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: C6 shift rod
I have one for a C4 that just came off a few days ago, no idea if they're different.
-
Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
Re: C6 shift rod
That I'm not sure about.luke-ao wrote:I have one for a C4 that just came off a few days ago, no idea if they're different.
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: C6 shift rod
I would wager that they are universal, but I'm not certain. I just measured a C6 and a C4 and the distance from the front of the bell housing to the centerline of the gear selector shaft on the trans are both 11-1/2".
This just came out of a 71 F100 with the original 302/C4 setup.
This just came out of a 71 F100 with the original 302/C4 setup.
You do not have the required permissions to view the files attached to this post.
-
Busboy
- Blue Oval Fanatic
- Posts: 943
- Joined: Sat Jan 24, 2015 9:51 am
- Location: Nampa Idaho
Re: C6 shift rod
I've got two from a c-6 equipped f-100 I'd sell.
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
-
70shortbox
- New Member
- Posts: 158
- Joined: Fri May 20, 2011 2:53 pm
- Location: Santa Rosa, CA