Wiring for dual horns
Moderator: FORDification
-
Ohiotinkerer
- Blue Oval Fanatic
- Posts: 852
- Joined: Wed Nov 09, 2016 5:49 pm
- Location: Galion, Ohio
Wiring for dual horns
WTB the yellow wire with connectors for dual horns - can be cut below the passenger side horn as long as there's plenty to splice with.
"Life is a garden - dig it"........... 
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Wiring for dual horns
Try these guys for the terminal ends then just buy the wire and make it easily enough.="Ohiotinkerer"]WTB the yellow wire with connectors for dual horns - can be cut below the passenger side horn as long as there's plenty to splice with.
http://www.wiringproducts.com/ford-connectors-sockets
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4