leaky water pump bolt
Moderators: Ranchero50, DuckRyder
- Dragon
- 100% FORDified!
- Posts: 2659
- Joined: Sat Feb 16, 2008 4:43 pm
- Location: Albuquerque, New Mexico
- Contact:
Re: leaky water pump bolt
Permatex makes the Right Stuff it replaced the old brown Permatex sealer and cleans up easier. It comes in a can with a dispenser nozzle and handle. It is black and acts like a cross between the brown Permatex and a very good silicone sealer.
Old Fords Rule
Was a Ford Service Tech
71 F250 with Shell Car 390 NP435 Dana 60 3.73s, PS, PB, 750 EC VS Holley Accel Points Eliminator.
98 Volvo S70 2.4T Auto
71 Service manuals Volumes 1,2,3 and 4 So ask away.
My Gallery
Spark test
Was a Ford Service Tech
71 F250 with Shell Car 390 NP435 Dana 60 3.73s, PS, PB, 750 EC VS Holley Accel Points Eliminator.
98 Volvo S70 2.4T Auto
71 Service manuals Volumes 1,2,3 and 4 So ask away.
My Gallery
Spark test
- leavittt
- New Member
- Posts: 31
- Joined: Wed Feb 11, 2009 1:17 am
Re: leaky water pump bolt
I have to agree with Dragon- Right Stuff is worth its' weight in gold! I work at the BYU autoshop here in Provo & we use that on all our GMC intake manifolds, water pumps & differential covers. We have done literally hundreds of them & I have never seen one leak so far.
1970 Ford F100 2WD SB 447 Strokered FE w/ T19
- floyd67
- New Member
- Posts: 205
- Joined: Tue Mar 08, 2005 8:33 pm
- Location: CANADA,carstairs, Alberta
Re: leaky water pump bolt
thanks i will have to look for that
1967 f1oo "floyd"
2013 f-150 DD
2005 audi a4 (wife's car)
2013 f-150 DD
2005 audi a4 (wife's car)
-
- New Member
- Posts: 35
- Joined: Wed Jan 05, 2005 9:24 pm
- Location: Georgia
Re: leaky water pump bolt
If you use right stuff do you still use the gaskets and coat both sides of the gaskets or eliminate the gaskets?
- Manny
- Blue Oval Guru
- Posts: 1190
- Joined: Wed Oct 04, 2006 7:15 pm
- Location: Georgia, Lake City
- Contact:
Re: leaky water pump bolt
I have seen people just use right stuff or just give a thin coat on the gasket. 3m use to sell silicone strips you out on and mushed together to make a true seal... don't know if they are still out there. But i will add another vote approving right stuffcalvinstoy wrote:If you use right stuff do you still use the gaskets and coat both sides of the gaskets or eliminate the gaskets?
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
- Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
Re: leaky water pump bolt
Great stuff!!floyd67 wrote:took it apart again, waiting for it to dry again, what is this "right stuff" you speak of?
Ron
You do not have the required permissions to view the files attached to this post.
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...