Hi guys, I'll looking for a dipstick and tube for front sump 390 fe motor. Can't seem to find one anywhere. Also, does any know the length of the stock tube and dipstick?
Thanks
Ron
need 390 dipstick and tube
Moderators: Ranchero50, DuckRyder
-
Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
need 390 dipstick and tube
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
-
71Fe2O3
- New Member
- Posts: 137
- Joined: Fri Mar 24, 2017 8:26 pm
- Location: CT
Re: need 390 dipstick and tube
When I replaced the engine in mine the tube got mangled, so I made one out of brake line. It has been holding up well for several years now. For the stick you may be able to get a universal, then put 5 quarts of oil in the engine and make a mark on it to indicate full.
Fred
1970 F100 4WD short bed, 360 engine, very rusty plow and yard truck
1971 F100 2WD long bed, 302 engine, on the road
1968 F100 2WD long bed, 360 engine, stripping for parts
1970 F100 4WD short bed, 360 engine, very rusty plow and yard truck
1971 F100 2WD long bed, 302 engine, on the road
1968 F100 2WD long bed, 360 engine, stripping for parts