Can anyone tell me if the serpentine belts and brackets from a 302 can be made to fit a 351 W ? I'm doing the Crown Vic IFS and Explorer rear end swap and I think the serpentine would look better and work better for the power steering.
Thanx !
302 serpertine pullys and brackets on a 351 W ?
Moderators: Ranchero50, DuckRyder
-
GonzoTx
- New Member
- Posts: 6
- Joined: Thu Sep 22, 2016 8:49 pm
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: 302 serpertine pullys and brackets on a 351 W ?
I'm not sure everything will match up to the block correctly. The deck height on a 351W is taller than a 302 and the heads sit at a different angle. You would do better going to a salvage yard and pulling the front parts from an 80-early 90's 5.8L F150, Explorer or Bronco. Be sure and get the crank pulley, timing cover and tensioner..
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
GonzoTx
- New Member
- Posts: 6
- Joined: Thu Sep 22, 2016 8:49 pm
Re: 302 serpertine pullys and brackets on a 351 W ?
Thanx Randy !