torque spec's 72 f250
Moderator: FORDification
-
tatonka
- New Member
- Posts: 6
- Joined: Sat Apr 13, 2013 7:16 pm
torque spec's 72 f250
the front axle nut that keeps the rotor on ,and holds bearing in place , was wondering where i can find the spec. . This is a camper special w/360 . thks
-
Mancar1
- 100% FORDified!
- Posts: 5390
- Joined: Thu Jun 10, 2010 8:13 am
- Location: USS Gramps Garage (DD-727) Tehama County, Northern Ca.
Re: torque spec's 72 f250
Tighten to 17-25 ft lbs. Install nut lock over the nut so the cotter pin hole in the spindle is aligned with a slot in the nut lock. Back off the adjusting nut and the nut lock 2 slots and install cotter pin.
Hope this helps u out......Keep on Trucking....John
Hope this helps u out......Keep on Trucking....John
May your sails stay full, and your knots not slip. Unless a slip knot.
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
-
tatonka
- New Member
- Posts: 6
- Joined: Sat Apr 13, 2013 7:16 pm
Re: torque spec's 72 f250
thank you