2wd F250(HD)/F350 power disk/ power steering parts

[guhfluh]

I'm searching for spindles, hubs, rotors, calipers, steering linkage and steering box/gear for 1-1/16" kingpin I-beams for my F-250. The 1-1/16" HD I-beams are the same as F-350 beams from what I can tell, and take the same caliper.

[fast65]

I have a rebuilt steering box and correct 2wd pitman arm attached.
I also have a dual diaphragm booster from an f350

[james d oberg]

i have the complete front suspension from a 70 f350 camper special. dual piston Dayton disc brakes, proportioning valve, gear box, etc. I also have the same form a 71 f250 camper special. but freight would be expensive.

jim

[guhfluh]

How much would you want for the parts? Since I don't need beams, the spindles, hubs and rotors could be shipped as an assembly in a box, same with the steering gear. The steering linkage can be shipped bare, just taped/tied together. I like to wrap stuff in old towels and tape it up for protection, like the tie rod ends or whatever. As long as it is 1-1/16" kingpin and fits a f250...

[james d oberg]

it is all doable but the rub is the appx $1.00 per pound the conventional shippers charge. i am not operating from a non-profit stand point and time is money for me. i think you would be better off trying to find something local. greyhound requires at least 1 1/2 hour round trip for me but like i say it is all doable.

jim

[guhfluh]

I have been trying to find something local without any luck. The one I did find is 7/8" kingpin and won't work.

How about just the spindles?

[guhfluh]

Nevermind. The only things I'm missing now are the steering linkage, brake booster to firewall brackets and the plastic piece that covers the hole in the firewall.