How do you remove the bearing at the lower end of the steering column? Mine is bad and is making noise. Is there any way to get the bearing out?
Thanks
Steering Column Bearing
Moderator: FORDification
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Steering Column Bearing
Unfortunately, it's hard to get to with the column installed. You have to either tap it out from inside the column with a long rod/pipe or pull it out from the bottom with something like a flywheel pilot bearing puller. It's much easier to pull the steering column totally out and then tackle it.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
- New Member
- Posts: 26
- Joined: Sun Mar 10, 2013 1:02 pm
Re: Steering Column Bearing
I already have the column out. I'm in the process of converting to power steering and I didn't want to put the column back in with a squeaky bearing.
Thanks for the info
Thanks for the info
-
- New Member
- Posts: 117
- Joined: Wed Sep 08, 2010 10:40 pm
- Location: Kirkland, Az
Re: Steering Column Bearing
Do you have a 2wd or 4 wd ? I just did a column on my step dad's hi boy and the bearings popped right out.
The 2wd shouldn't be much different.
The 2wd shouldn't be much different.