77 stang

neverdone · Post by **neverdone** » Sun Nov 23, 2008 9:54 pm

found one on craigslist for 400, will the front end suspension be what i'm looking for if i decide to go with the mustang 2 front end...for bags?

Post by **FORDification** » Mon Nov 24, 2008 10:17 pm

The Mustang front end that you get from Fatmans (or a similar vendor) is not actually a 100% stock Mustang II suspension...it's just based on that style. The stock Ford pieces won't be heavy enough to last long on a truck...and you'd still have a ton of fabricating to do, even if you were determined to make it fit.

Don't try to reinvent the wheel....just go with the kit.

My

69NVF100 · Post by **69NVF100** » Tue Nov 25, 2008 2:33 pm

I have to agree although you may save a few dollars intially, it will probally cost you more in the long run to buy the used stuff then just buying a kit designed for our trucks.

KF100TK · Post by **KF100TK** » Wed Nov 26, 2008 6:26 pm

Find a 03 and up crown vic @ the wrecker and unbolt it. Comes with aluminum cross member, disk brakes, power rack, sway bar and petty much bolts in.
I found one for $175.00 complete.

stangconv · Post by **stangconv** » Wed Nov 26, 2008 6:37 pm

wanna find me one??? ^^^^^^

edit holy crap you are in Calgary????

Seriuoly find me one... I will even pay you extra for your time!!!!

neverdone · Post by **neverdone** » Thu Nov 27, 2008 11:29 am

yea thx for the advice guys, fatmans is a nice kit but doesnt fit into my budget build, the 03-up crown vicky front is what i'll probably do....dont mean to say i found better but...i sorta kinda did..

, from tire to tire $150 at lkq junkyard in tampa woot woot!.....problem is i didnt look at the year of the car, i took pics but i still cant determine the yr bcuz u really cant see the control arms...my bad i guess

would it be a good idea to buy the master cylinder and booster and all of that so i have a better braking system...or will it not work??

td · Post by td » Thu Nov 27, 2008 3:22 pm

neverdone,

just by looking at those pics that doesn't look like the removable alum. cross member the 03 and up has.

neverdone · Post by **neverdone** » Thu Nov 27, 2008 5:48 pm

what in the pics indicate that??.

td · Post by td » Thu Nov 27, 2008 10:45 pm

neverdone wrote:what in the pics indicate that??.

look at the last pic, thats steel not alum. the steel one are welded in not bolted like the alum. ones.

neverdone · Post by **neverdone** » Fri Nov 28, 2008 6:25 pm

i cant see any welds bcuz they come out blurry when i enlarge them....but u just saved me an hour ride if you can tell its not the right one for me..thx!

The FORDification.com Forums

77 stang

77 stang

Re: 77 stang

Re: 77 stang

Re: 77 stang

Re: 77 stang

Re: 77 stang

Re: 77 stang

Re: 77 stang

Re: 77 stang

Re: 77 stang