360 c6 internals different from 429 c6?
Moderators: FORDification, 70_F100
-
RTG_RACING
- Preferred User
- Posts: 406
- Joined: Thu Apr 05, 2007 8:35 am
- Location: Indiana
It's not to bad to rebuild a c6. I have guts out of an fe and 385 series c6. So if you find any hard parts damage let me know. Other than shifter arms. There are a few things that changed in the c6 to look out for. Some had a servo piston that you can put a new seal on. Some you can't replace the seal and need to buy a new servo piston. Some valve bodies don't mix either. While they may bolt on it doesn't mean it will work. But don't fret because if you install the wrong valve body you will know.