I'm all set on my shift selector lever bushings for my 3 on the tree. But my searches are coming up empty for these bushings where the shift rods attach to the transmission gear selector levers on the left side of the truck (link to pics):
https://1drv.ms/i/s!AviebioptyTxomfX8Kbmdh8n4Gku
https://1drv.ms/i/s!AviebioptyTxomgxvWpbLNqqx_aw
Can anyone point me in the right direction?
'67 F100 w/3.03: shift rod bushings @ trans? (not @ column)
Moderators: FORDification, 70_F100
-
xanthias
- New Member
- Posts: 15
- Joined: Sat Jan 07, 2017 4:04 pm
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: '67 F100 w/3.03: shift rod bushings @ trans? (not @ column)
Unless I'm mistaken it's the same as the ones on the column levers http://dennis-carpenter.com/m/product.a ... 5TZ-7343-A The replacements are a struggle to install and I had to "tweak" mine to get them in.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
xanthias
- New Member
- Posts: 15
- Joined: Sat Jan 07, 2017 4:04 pm
Re: '67 F100 w/3.03: shift rod bushings @ trans? (not @ column)
Thanks Randy. I'll run that down and report back. I have a set but D.C. describes them as for the column. Which, there's also a plastic set for the column too.
-
xanthias
- New Member
- Posts: 15
- Joined: Sat Jan 07, 2017 4:04 pm