My transmission cross member for a 69 f100 4x2 has 3 bolt holes in each end, all drawings on this web site shows only 1 in center through frame. the front & rear holes are in edge of u shape with spacers to prevent destorition if bolts are used in these holes. I know that the cross member is original as i bought the truck new. Just been apart for several years.
Thanks
Transmission cross member
Moderators: FORDification, 70_F100
-
blue oval for ever
- New Member
- Posts: 1
- Joined: Mon Jun 10, 2013 12:38 am
Transmission cross member
You do not have the required permissions to view the files attached to this post.
Last edited by blue oval for ever on Sat Jun 15, 2013 11:33 pm, edited 3 times in total.
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Transmission cross member
from Georgia! FWIW, here's a pic I've been saving showing the 3 different x/m's for our trucks. #1 and #2 look identical to me but the poster had said they are all different applications and all are in their original state. However, there's a lot I don't know and I've seen some strange variations that people have posted on these trucks. Welcome to the forums and looking forward to pics of your truck!You do not have the required permissions to view the files attached to this post.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.