'71 F250 FWD Axle

njs · Post by **njs** » Tue Apr 28, 2009 3:37 pm

Took the axle out as someone had used silicone? to seal it and found an aluminum gasket under the cap which has deteriorated and broken. Is there somewhere I can buy these or can I make one using .030 gasket stock?
Thanks for any suggestions.
J

Redcap · Post by **Redcap** » Tue Apr 28, 2009 3:42 pm

Under the pumpkin cover? I always use RTV.

njs · Post by **njs** » Tue Apr 28, 2009 3:53 pm

Redcap,
No, this is the 8 bolt cap that is part of each axle. It is furthest most cap - sticks out beyond the wheel.
J

fordman · Post by **fordman** » Tue Apr 28, 2009 4:48 pm

have you checked the links page for vendors who sell our stuff?

heep70 · Post by **heep70** » Wed Apr 29, 2009 1:03 pm

I make my own from gasket paper.

averagef250 · Post by **averagef250** » Wed Apr 29, 2009 2:41 pm

Locking hubs, or drive flanges are what you are referring to. Caps doesn't really tell us what you're working on. Make your own gaskets or RTV works fine.

Redcap · Post by **Redcap** » Wed Apr 29, 2009 3:45 pm

RTV it!

The FORDification.com Forums

'71 F250 FWD Axle

'71 F250 FWD Axle

Re: '71 F250 FWD Axle

Re: '71 F250 FWD Axle

Re: '71 F250 FWD Axle

Re: '71 F250 FWD Axle

Re: '71 F250 FWD Axle

Re: '71 F250 FWD Axle