Compression Ratio

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
User avatar
AK F100
Preferred User
Preferred User
Posts: 337
Joined: Fri Mar 30, 2007 12:43 pm
Location: Eagle River, AK

Compression Ratio

Post by AK F100 »

I have a 302 out of an early 80's Mercury Capri and I have GT-40 heads installed on it. How would I go about figuring the Compression Ratio? Thanks in advance.
GPBFD Pyro Maniac
Daily Driver: 1974 F100 4x4 (ride'n on 8-Luggers) Build in progress
1997 F-350 Crew Cab 4x4, 7.3L Diesel SOLD
Pile-O-Parts: 1968 F100 - 2WD Shorty SOLD
Looking for a new project 57-60 Ford Truck
User avatar
DuckRyder
Moderator
Moderator
Posts: 4893
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

Re: Compression Ratio

Post by DuckRyder »

You are going to need a lot of specific measurements to determine it accurately:

Take a look at:

http://kb-silvolite.com/calc.php

http://www.empirenet.com/pkelley2/DynamicCR.html

You can use nominal production specifications but it will be less accurate...
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
User avatar
AK F100
Preferred User
Preferred User
Posts: 337
Joined: Fri Mar 30, 2007 12:43 pm
Location: Eagle River, AK

Re: Compression Ratio

Post by AK F100 »

Thanks, I'll check it out when I get a chance. :thup:

:fr:
GPBFD Pyro Maniac
Daily Driver: 1974 F100 4x4 (ride'n on 8-Luggers) Build in progress
1997 F-350 Crew Cab 4x4, 7.3L Diesel SOLD
Pile-O-Parts: 1968 F100 - 2WD Shorty SOLD
Looking for a new project 57-60 Ford Truck
Post Reply