Need some C6 tranny help

[fordman]

i just pulled a shaft from a truck today that had a c6 in it it is 24 inches from the center f the ujoints to the center of the carrier bearing and 30 inches from the cenmter of the ujoints to the end of the splines.

[dropper]

Thanks guys,
Two piece it will stay.

Fordman,
What was the year of that truck? What size engine was in it?

[fordman]

it was a 70 with a 360 in it. the three speed two piece drive shaft i have is longer. than the c6 drive shaft. i'm thinking of ebaying them to get rid of them.

[dropper]

Finished her up Sunday!

This is what it took to swap my C4 for a C6 in a 72 F100 302 LWB:
New trans cooler lines
Linkage (used threadall)
I used mount from C4
Moved crossmember back 2 inches, I had to drill frame
Drive shaft from a 73 F100 with C6

I think thats it. When I write it down it doesn't seem like much. But all together it took me maybe 25 hours. Thats pulling two transmissions and installing one.

After test driving it I remembered the joy of drum brakes. So I'm off to the boneyard this evening to get a disk front end.

Thanks For all the help guys,
Josh