C6 tranny question

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
69fordkh
New Member
New Member
Posts: 32
Joined: Tue Oct 26, 2010 2:12 pm
Location: Ocean Shores,Washington

C6 tranny question

Post by 69fordkh »

The c6 tranny in my 69 f250 makes a grinding noise when I put it into park could it be because the tranny is still rotating?
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: C6 tranny question

Post by basketcase0302 »

="69fordkh"The c6 tranny in my 69 f250 makes a grinding noise when I put it into park could it be because the tranny is still rotating?
I do know there is a rod called the "parking pawl" that might come into play here, (but by far no tranny guy just owned a few C-6 in my lifetime).

Hoping someone else can chime in here that knows our "slushboxes" a little better! :pray:

Bump... :wink:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Post Reply