Ranger Bed Emblem Location

[Blue_Streak]

Hi All;

So with all this stuff going on with the Corona Virus going on and the world going to hell in a handbasket , I find myself initially working from home and maybe a potential layoff depending on how long this economy tanks. I've decided that I have a bit of time to get back to work on the rebuild.
I am changing my 1967 base cab into a Ranger model with a lot of the accompanying Ranger trim although not always year correct to my '67. Anyhow , since my base didn't have the Ranger emblem on the bed I am looking to see if anyone might have the correct pin hole locations for each side so that I can drill the proper holes. Maybe dimensions from the upper bump seam and say the tail light extender seam. I did a search and nothing came up. I did find a schematic for the location of the car door mirrors in the tech section as my doors had the western mirrors.
Thanks in advance

[beejaytx225]

Maybe this will help? I'll measure it when the rain stops.

[Blue_Streak]

Yes. Thank you for the pic. That does help a little bit. What's that like an 1" , 1.25" from each seam?

[beejaytx225]

Looks to be about 1.75" from rear body line.

IMG_10042020_192515_(1350_x_1800_pixel).jpg

And about 1.5" from lower body line

IMG_10042020_192713_(1275_x_1700_pixel).jpg

[beejaytx225]

If you need the measurements for the holes that need drilled in the bed let me know.

[Blue_Streak]

That's awesome. Thanks so much. I really appreciate it.
And if you mean the actual hole locations for each side , that would be perfect.
If you mean where the pins are on the emblem , I have the re-popped emblems so I can hopefully, correctly do the math.