tranny question ?????
Moderators: FORDification, 70_F100
-
- New Member
- Posts: 17
- Joined: Tue May 10, 2005 11:48 pm
- Location: CANADA, Winnipeg, Manitoba
tranny question ?????
the 240 ci in my truck is very tired , i want to know if a 302 ci will hook up to the 3 speed manual trans???
will the 6 cyl flywheel work???
the 302 i have is out of a 77 f-150 does that make any differance???
so many questions!..........lets start with that!!!!
will the 6 cyl flywheel work???
the 302 i have is out of a 77 f-150 does that make any differance???
so many questions!..........lets start with that!!!!
you can hit me , you can kick my dog, but don't touch the truck
- 68F250
- Blue Oval Guru
- Posts: 1174
- Joined: Thu Jul 22, 2004 3:26 pm
- Location: California, Brea
re: tranny question ?????
The 240/300 flywheel will bolt up to the 302 but the balance will be all wrong. Small blocks use a 28oz. imbalance up to '81.
Barry
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: tranny question ?????
Automatics don't have a flywheel, they have a flexplate. Completely different. A flexplate is basically just a thin piece of metal that acts as a coupler between the crankshaft and the torque converter.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- 68F250
- Blue Oval Guru
- Posts: 1174
- Joined: Thu Jul 22, 2004 3:26 pm
- Location: California, Brea
re: tranny question ?????
What's funny is the MPC calls them all flywheels.
You do not have the required permissions to view the files attached to this post.
Last edited by 68F250 on Thu Mar 16, 2006 9:54 pm, edited 1 time in total.
Barry
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- mk
- Blue Oval Fanatic
- Posts: 917
- Joined: Wed Mar 02, 2005 1:12 am
- Location: CANADA, central Alberta
re: tranny question ?????
Pressure plate is what bolts to the flywheel, with the clutch plate sandwiched in between...
mike
mike
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact: