Morning guys... On top of the radiator support there are 3 holes on each side with the nuts in them. In the 3 holes go the grill, inner fender and then the fender. Question is... in which order do the go on.
Thanks
Ron
My stupid question of the week
Moderator: FORDification
- Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
My stupid question of the week
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
-
- 100% FORDified!
- Posts: 2060
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: My stupid question of the week
I've seen stupider questions.
I don't have my truck handy but I'd mount the inners then the fenders ,the grille goes on last.
I don't have my truck handy but I'd mount the inners then the fenders ,the grille goes on last.
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: My stupid question of the week
Cab, radiator support, cab fender mounts, inner fenders, fenders, hood latch / valance, grill, lower front valance, bumper, hood.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
- jzjames
- 100% FORDified!
- Posts: 1776
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: My stupid question of the week
Good one. gonna write that down. Thank you.
- Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
Re: My stupid question of the week
Thanks guys for the replies! That makes it a no-brainer.
Ron
Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...