Right rear bearing
Moderators: FORDification, 70_F100
-
- New Member
- Posts: 77
- Joined: Sun Jan 22, 2017 8:21 am
- Location: Reidsville, NC
Right rear bearing
I’m having slight friction/grinding sound on the right rear wheel area. there is no smell or leakage on wheel. Would this be the wheel bearing ? There is oil in rear end, etc. also can I pull the axle out without removing the hogs head. Any advice be greatly appreciated.
- 1972hiboy
- 100% FORDified!
- Posts: 2421
- Joined: Thu Sep 09, 2010 5:44 pm
- Location: California, Santa Cruz
Re: Right rear bearing
f100? f250?70xlt wrote:I’m having slight friction/grinding sound on the right rear wheel area. there is no smell or leakage on wheel. Would this be the wheel bearing ? There is oil in rear end, etc. also can I pull the axle out without removing the hogs head. Any advice be greatly appreciated.
Rich
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
-
- New Member
- Posts: 77
- Joined: Sun Jan 22, 2017 8:21 am
- Location: Reidsville, NC
Re: Right rear bearing
F100, did frame off so rear end sat for 1.5 yrs. got 800 miles on rebuilt 302 engine, auto. Purchased and then did rebuild so I never did much distance or speed on truck until now. Today since rear end cooled, right tire still hard to spin by hand and can hear in rear end turning noise, left side turns freely with little noise.
Thanks
Thanks
- bluef250
- Blue Oval Fanatic
- Posts: 924
- Joined: Fri Oct 29, 2004 8:49 pm
- Location: Arizona
Re: Right rear bearing
Pull the hub and check the brake assembly.