What is this thing?

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
Gregtx
New Member
New Member
Posts: 45
Joined: Fri Jun 10, 2016 7:46 am

What is this thing?

Post by Gregtx »

Can anyone help me identify this seal? I recently fished this out of the filler neck of my radiator and I have absolutely no clue what this is, where it came from or how it got in there to begin with.

[image]604[/image]

[image]603[/image]

I figure since it was fished out of the top of the radiator, it must have entered through there as well unless the truck was run without a thermostat at some point. Maybe it's simply just some trash that found it's way into the radiator, possibly from a junkyard or something?

The truck is running fine otherwise, but I'd sure like to know if this looks like it might be something I should be concerned about or not. Obviously, I'm going to be flushing and cleaning my cooling system in the near future. I've got the oxalic acid crystals on order now.
Greg

1968 F-250 Camper Edition Special
F250 Build Thread

[image]561[/image] [image]600[/image]
Busboy
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 943
Joined: Sat Jan 24, 2015 9:51 am
Location: Nampa Idaho

Re: What is this thing?

Post by Busboy »

Doesn't look familiar.
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1882
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Re: What is this thing?

Post by colnago »

Must be those muffler bearings that everyone talks about. Not an option for my '67, and I'm not sure how they got in the radiator. ... unless you had one @#$%&* of a backfire through the carb! :wink:

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
User avatar
DuckRyder
Moderator
Moderator
Posts: 4924
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

Re: What is this thing?

Post by DuckRyder »

What is it made out of...?

It looks vaguely like part of the shutoff valve on those funnels/tubes like you use for gear lube and such...
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
User avatar
jzjames
100% FORDified!
100% FORDified!
Posts: 1776
Joined: Sun Jan 09, 2005 2:59 pm
Location: Washington, Windy Point

Re: What is this thing?

Post by jzjames »

Looks like part of a hose or part of a spray nozzle on a hose. :D
tsherry
Preferred User
Preferred User
Posts: 487
Joined: Fri Dec 23, 2005 11:26 pm
Location: Washington, Spokane

Re: What is this thing?

Post by tsherry »

>>Looks like part of a hose or part of a spray nozzle on a hose.>>

^^This.^^ I have one on my hose end sprayer. Identical. And, really, really old.
too many Fords, no where near 'nuff time.

or, money.
User avatar
Jacksdad
Blue Oval Fan
Blue Oval Fan
Posts: 579
Joined: Sat Mar 30, 2013 8:52 pm
Location: San Diego, CA

Re: What is this thing?

Post by Jacksdad »

Makes sense - someone used a hose to fill the radiator and that fell off.
1971 DRW F350 cab and chassis with an Open Road motorhome conversion, Dana 70, 352 (originally 390)/C6, PS, power front discs, and 159" w/b.
Gregtx
New Member
New Member
Posts: 45
Joined: Fri Jun 10, 2016 7:46 am

Re: What is this thing?

Post by Gregtx »

The spray hose nozzle is likely the correct answer, and it makes total sense. Good knowing it’s not something more critical.

Thanks for the ideas, ya’ll!
Greg

1968 F-250 Camper Edition Special
F250 Build Thread

[image]561[/image] [image]600[/image]
Post Reply