hooking up new tach HEI dissy

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

hooking up new tach HEI dissy

Post by Ron_Hall »

Well I got new tach for my first start and not 100% on hooking it up. I have a red(to battery) Black(to ground) and I have a green that I think goes to the tach hookup on the HEI. right or ?
Thanks
Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
cep62
100% FORDified!
100% FORDified!
Posts: 2060
Joined: Sun Oct 26, 2008 8:06 pm
Location: West Michigan

Re: hooking up new tach HEI dissy

Post by cep62 »

yes
User avatar
DuckRyder
Moderator
Moderator
Posts: 4924
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

Re: hooking up new tach HEI dissy

Post by DuckRyder »

That would be typical, probably a white to illumination... what kind of tach?
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Re: hooking up new tach HEI dissy

Post by Ron_Hall »

DuckRyder wrote:That would be typical, probably a white to illumination... what kind of tach?
Just a cheap Bosch for the break-in,It won't be in the truck.
Thanks
Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Re: hooking up new tach HEI dissy

Post by Ron_Hall »

cep62 wrote:yes
Thanks!!
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Post Reply