F100 headers

[Fordluck]

I saw u few replies on headers for 67-72 has no one found longtubes that will work .IVE Tried hooker 6912-1hkr and hooker 6904-1hkr neither worked .I have a third set coming hedman 89156 that are 69-78 302 specific im hoping these work .Aguy told me he put a set bbk shorty equal lenth 15120 on a 72 .IF anyone has found a set of longtubes or shorty equal length please list brand and part number .THANKS FOR THE HELP,Fordluck

[RottenAppleRed]

I'm in the middle of building my '72 F100 LWB that is temporarily getting life from a very healthy 351C 4V out of my '70 Cougar XR7. After doing several searches, I found a post where someone used some Blackjack/Cyclone headers for the '70 Mustang but had to use a set of Hedman offset header X-tensions. The reason being...when installed, the header collector is aiming right at the radius arm crossmember. After a test fit of the Cleveland and my Cyclone headers, I found him to be correct. I plan on getting the headers installed this weekend with the offset kit as well. I will post my final results.

Moral of the story...if the headers will work on the Cleveland from a Mustang/Cougar, then the 302 headers for the 302 of the same application should net a very similar result.

To add, my Cleveland is backed by a C6 auto with no header clearance issues at all.

[Fordluck]

anyone know how to contact sargentrs on here

[Fordluck]

Headman headers prt# 89156 don't fit either its my 3rd set sent back to summit. Theres gotta be someone who has found a set of longtubes to fit 67-72 f100 with a 351w

[colnago]

anyone know how to contact sargentrs on here

You should be able to search for his name. Click on his name, and the site should let you send a PM or e-mail.

Joseph

On edit, I just did a search for him. Looks like you can send a PM, but he doesn't have an e-mail listed.

[Fordluck]

I tried that I didn't find any contact info

[sargentrs]

Sorry, busy weekend. Sent you a PM, Fordluck, and also set my profile to allow email. What's up?