What Rubber Motor Mounts to Use?

[colnago]

All,

I'm getting closer to finishing my engine rebuild (it's about time), and realized that I probably need new motor mount pads. Rock Auto has DEA, Pioneer, Anchor, and Westar. LMC has unknown at 3x the price. I haven't checked NAPA yet. Any opinions on good, bad, or ugly? I haven't looked into tranny mounts, but the same question.

Joseph

[71Fe2O3]

When I replaced the 360 in my plow truck I bought engine mounts from NAPA. I didn't do any comparison shopping or put much thought into the choice-the local store had them in stock so that's what I got. From what I recall the price seemed reasonable. The mounts seemed sturdy, fit well, and have held up with no issues for several years now.
I haven't replaced transmission mounts, so can't offer any information or advice about them.

[DisneysPatB]

We stock Anchor and DEA, Rock Auto buys from us.

[Manny]

Napa is pretty good but they often will be anchors too. They will do you fine. You want to be old school bolt a piece of chain from the driver side down to the cross member. That way if it breaks it does not totally give out.