Shifter popping out
Moderators: FORDification, 70_F100
-
ahgrafx
- New Member
- Posts: 14
- Joined: Tue Apr 04, 2017 9:02 am
Shifter popping out
Since I don't have a choice I don't know exactly what Hardware is supposed to be in place to keep the shifter stick in place it pulls right out has a couple Dome pieces on top of a spring that just pulls right out of the hole any diagrams or suggestions to fix this would be greatly appreciated and where everyone gets their Chilton's cuz it doesn't seem to be for sale at any auto store locally thanks
-
71Fe2O3
- New Member
- Posts: 137
- Joined: Fri Mar 24, 2017 8:26 pm
- Location: CT
Re: Shifter popping out
Some more information, and pictures, might help you to get some advice.
I doubt they sell Chiltons or Haynes manuals for these trucks any more. I have one, bought used from an eBay seller, and it is not terribly useful.
The best manual as far as I know is the Ford shop manual, which you can find in electronic form at the following website.
https://www.hipoparts.com/1964-72-ford- ... atalog-cd/
It has wiring diagrams and also expanded diagrams of every system on the truck.
You can also find many relevant diagrams on this site. Find the expanded diagram, puzzle over it until you figure out what you are looking at, zoom in on it to find the parts, and then do google searches on the part numbers.
I doubt they sell Chiltons or Haynes manuals for these trucks any more. I have one, bought used from an eBay seller, and it is not terribly useful.
The best manual as far as I know is the Ford shop manual, which you can find in electronic form at the following website.
https://www.hipoparts.com/1964-72-ford- ... atalog-cd/
It has wiring diagrams and also expanded diagrams of every system on the truck.
You can also find many relevant diagrams on this site. Find the expanded diagram, puzzle over it until you figure out what you are looking at, zoom in on it to find the parts, and then do google searches on the part numbers.
Fred
1970 F100 4WD short bed, 360 engine, very rusty plow and yard truck
1971 F100 2WD long bed, 302 engine, on the road
1968 F100 2WD long bed, 360 engine, stripping for parts
1970 F100 4WD short bed, 360 engine, very rusty plow and yard truck
1971 F100 2WD long bed, 302 engine, on the road
1968 F100 2WD long bed, 360 engine, stripping for parts
-
eggman918
- Blue Oval Guru
- Posts: 1098
- Joined: Fri Nov 20, 2009 12:56 pm
- Location: Paulden,AZ.
Re: Shifter popping out
7220 is what holds it in it pushes down on the domed piece and spring and twists ~15* and locke on to the two pins
http://www.fordification.com/tech/image ... rshift.jpg
http://www.fordification.com/tech/image ... rshift.jpg
Steve
The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner
"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner
"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
-
colnago
- 100% FORDified!
- Posts: 1882
- Joined: Tue Jun 14, 2011 8:48 pm
- Location: Ridgecrest, CA
Re: Shifter popping out
More info needed. What tranny are you talking about?
Joseph
Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
-
ahgrafx
- New Member
- Posts: 14
- Joined: Tue Apr 04, 2017 9:02 am
Re: Shifter popping out
exactly what I needed thanks eggman918!eggman918 wrote:7220 is what holds it in it pushes down on the domed piece and spring and twists ~15* and locke on to the two pins
http://www.fordification.com/tech/image ... rshift.jpg
is this a part i will need to get at a salvage yard or are there new ones made?
thanks everyone
-
eggman918
- Blue Oval Guru
- Posts: 1098
- Joined: Fri Nov 20, 2009 12:56 pm
- Location: Paulden,AZ.
Re: Shifter popping out
Boneyard,Ford and Dodge both used the 435 and the shift towers should be the same. 
Steve
The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner
"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner
"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?