drive shaft wanted! 68 F100 long bed

Moderator: FORDification

Post Reply
gaertner_jan
New Member
New Member
Posts: 39
Joined: Mon Dec 21, 2015 3:47 pm
Location: Allentown, PA & Switzerland
Contact:

drive shaft wanted! 68 F100 long bed

Post by gaertner_jan »

Hey folks,

Anybody out there have a spare rear (long) drive shaft for a 68' long bed? And while we're at it I'd be interested in a rust free, not beat up tail gate too...

thanks! J
User avatar
two-bit
Blue Oval Fan
Blue Oval Fan
Posts: 620
Joined: Thu Jul 06, 2006 6:19 pm
Location: Michigan, Ishpeming

Re: drive shaft wanted! 68 F100 long bed

Post by two-bit »

I may have one. It will be about a week before i check on it. It came off of a 69' F-100 long box. So it should work.
Shipping it to PA, or Switzerland ?
Two-bit
Living life full throttle on the North Coast of America!!!

72' F-350, DRW, 360, NP435, Dana 70, 159" WB, P.S., P.B., 12' flatbed, 10,000 GVW.
gaertner_jan
New Member
New Member
Posts: 39
Joined: Mon Dec 21, 2015 3:47 pm
Location: Allentown, PA & Switzerland
Contact:

Re: drive shaft wanted! 68 F100 long bed

Post by gaertner_jan »

Hey two-bit,

thanks for the reply. I'm still on the hunt! If you do have one what kind of price are you thinking of? Shipping would be either PA or Florida... depending on how quick you are. The project car in PA is heading out soon, the one in Florida not for a while....

thanks, J
User avatar
two-bit
Blue Oval Fan
Blue Oval Fan
Posts: 620
Joined: Thu Jul 06, 2006 6:19 pm
Location: Michigan, Ishpeming

Re: drive shaft wanted! 68 F100 long bed

Post by two-bit »

Wasn't where i thought it was. Not sure where it went.
Sorry Jan. No luck here.

Two-bit
Living life full throttle on the North Coast of America!!!

72' F-350, DRW, 360, NP435, Dana 70, 159" WB, P.S., P.B., 12' flatbed, 10,000 GVW.
Flightman91
New Member
New Member
Posts: 135
Joined: Wed Nov 21, 2012 8:33 am
Location: Sabattus Maine

Re: drive shaft wanted! 68 F100 long bed

Post by Flightman91 »

You still looking for a drive shaft?
1967(ish) Ford F250 4X4. 390, NP435, Dana 24, Dana 44 front end closed knuckle 4.11 Drum brake, Dana 60 rear end 3.73 Drum brake
2005 Subaru Forrester XS manual
2009 Scion XB Auto
gaertner_jan
New Member
New Member
Posts: 39
Joined: Mon Dec 21, 2015 3:47 pm
Location: Allentown, PA & Switzerland
Contact:

Re: drive shaft wanted! 68 F100 long bed

Post by gaertner_jan »

Hey two-bit, ok thanks anyway!
@ Flightman91: sure am! =) Do you happen to have one in approx. 40"-ish length?
If I can't find one used I'm thinking of trying one of the DIY kits..

thanks! J
bp69f100mutt
New Member
New Member
Posts: 32
Joined: Mon Nov 18, 2013 10:58 pm
Location: Casper WY
Contact:

Re: drive shaft wanted! 68 F100 long bed

Post by bp69f100mutt »

If you still need one, I DO have one readily available, just not sure how to get it shipped to you off hand. Off of a 69 F100 LWB 2WD.
Ford came first, and the Dodge Bothers made the motors for Ford. Who are these lil boys and their "Bow-Ties?"
NWFLF100
New Member
New Member
Posts: 51
Joined: Sat Mar 26, 2016 9:44 pm
Location: NW Florida/ Panama City

Re: drive shaft wanted! 68 F100 long bed

Post by NWFLF100 »

I have one listed on eBay off a '69 F100, Auto, 2WD, LWB

$99.99 plus shipping.

https://www.ebay.com/itm/122119900422

1969 Ford F-100 F-250 LWB Driveshaft 1967 1968 1970 1971 1972 1973
User avatar
hdman90
Preferred User
Preferred User
Posts: 382
Joined: Thu Mar 19, 2015 8:34 am
Location: Erie, Pa
Contact:

Re: drive shaft wanted! 68 F100 long bed

Post by hdman90 »

Where at in PA?
1969 F-100 LWB 2wd 240 3spd manual
1969 F-250 LWB 4wd 360 4spd manual
1976 F-250 Supercab LWB 2wd 390 4spd manual
Post Reply