I don't know if this the right place for this
I got a question about the price of stock oil pans for fe's
fe oil pans
Moderators: Ranchero50, DuckRyder
-
arkrider410
- New Member
- Posts: 81
- Joined: Tue Nov 18, 2014 4:25 pm
- Location: north Georgia
fe oil pans
low and ugly 72 longbed with a 360 converted to a 401 with performer intake and a 750 double pumper carb 260 cam and headers with a c6 auto and stock 9 inch lowered about 5.5 /7.
Build thread http://www.fordification.com/forum/view ... 22&t=79488
-
HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: fe oil pans
The oil pan is bolted to the engine. This is the engine forum. It would make sense to post it here.
The only one I know of is a front sump from Summit. Canton sells FE pans and some even have a kickout....A rear sump would have to be pirated from a 4wd application.... maybe a passenger car?
The only one I know of is a front sump from Summit. Canton sells FE pans and some even have a kickout....A rear sump would have to be pirated from a 4wd application.... maybe a passenger car?
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
-
tnlprt
- Blue Oval Guru
- Posts: 1144
- Joined: Thu Jul 08, 2010 5:18 pm
- Location: St Louis mo
Re: fe oil pans
ALL passenger cars have FRONT sump pans
...Which oil pan are you looking for
4 wheel drive pans are more than just a pan
They consist of
dip stick....dipstick tube.....oil pickup tube....oil pan and the main bolt with a stud
Car pans are shallower in the front compared to truck pans
Car pans also can be had with different baffles...
ALL can affect the price
So what is the question
...Which oil pan are you looking for
4 wheel drive pans are more than just a pan
They consist of
dip stick....dipstick tube.....oil pickup tube....oil pan and the main bolt with a stud
Car pans are shallower in the front compared to truck pans
Car pans also can be had with different baffles...
ALL can affect the price
So what is the question
-
HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: fe oil pans
Well thanks for the correction....
..... And the question is....... wait for it... here it comes!
..... And the question is....... wait for it... here it comes!
-
arkrider410
- New Member
- Posts: 81
- Joined: Tue Nov 18, 2014 4:25 pm
- Location: north Georgia
Re: fe oil pans
How much can I sell one for.I got 5 or 6.
low and ugly 72 longbed with a 360 converted to a 401 with performer intake and a 750 double pumper carb 260 cam and headers with a c6 auto and stock 9 inch lowered about 5.5 /7.
Build thread http://www.fordification.com/forum/view ... 22&t=79488
-
DuckRyder
- Moderator
- Posts: 4941
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: fe oil pans
When you figure out what they are and how much - THEN they go in the classifieds BTW...
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
arkrider410
- New Member
- Posts: 81
- Joined: Tue Nov 18, 2014 4:25 pm
- Location: north Georgia
Re: fe oil pans
That's what trying ask what they're worth
low and ugly 72 longbed with a 360 converted to a 401 with performer intake and a 750 double pumper carb 260 cam and headers with a c6 auto and stock 9 inch lowered about 5.5 /7.
Build thread http://www.fordification.com/forum/view ... 22&t=79488
-
cep62
- 100% FORDified!
- Posts: 2083
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: fe oil pans
Start at 1/3 - 1/2 of new price, if no one responds ,thats too much. 
-
DuckRyder
- Moderator
- Posts: 4941
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: fe oil pans
A Milodon stock replacement pan is about $140.00 and it has a better baffle than a stock truck pan.
They are also going to be a pain to ship due to size...
I would be surprised if you can get $50.00 plus shipping out of them, but I've been surprised before.
They are also going to be a pain to ship due to size...
I would be surprised if you can get $50.00 plus shipping out of them, but I've been surprised before.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper