I'm looking for the fill pipe for the aux tank

[Canonman67]

You wouldn't think it would be that hard would you? It's not really, I have one for a styleside, problem is I have a flareside. I'll take any one of the three C8TZ-9034-D, D0TZ-9034-L, or D1TZ-9034-B as ong as it has the vent tube like the drawing. http://www.fordification.com/tech/image ... -aux01.jpg

OR if someone has another option that would get me on the road I'm open to all suggestions except cutting the bed. I have the hose that brings the fill and vent between the frame and the bed so it's just getting things to a place where I can fill the tank from.

[Ranchero50]

Make one out of fabbed up exhaust pipe U bends. If it has dips and creates a U trap you'll need to run a 3/4" hose inside for a vent line or it'll burp on you when filling.

[Canonman67]

I'm liking that idea more and more as I price actual filler pipe. A couple 90s, some hose to join them and I think I can use the fill pipe from the parts truck in the fender. Thanks Ranchero50.

[goody]

Hi, I found a suitable replacement filler hose for my 70 F250 Auxiliary Tank on the internet. It is called "Filler Neck Supply". They don't have Factory Replacements but for the 2-1/4" hose they had one with a 45 degree angle that was extra long and can be cut to match the original. I also got the 3/4" Vent hose from them. It had a 90 degree angle but will work fine. Check them out they should have something you can use.

[Canonman67]

Thanks Goody, I did find them while looking around for solutions. It's nice to have a recommendation for them. I just need to figure out how I want to run the filler now.

[Canonman67]

WOW, I just checked the price of the hose you bought Goody and I'm irritated with myself, I spent twice as much for the one from LMC. For others looking to replace their aux tank fill hose here's the link. http://www.fillernecksupply.com/2-1-4-i ... 203-24713/ As long as you have the metal shield ( you could probably make your own) this fills the bill.