My truck originally had a 2 piece driveshaft setup. I'll be running a C4 auto and 8.8 rear from an '02 Crown Victoria. I'm wondering if a driveshaft from a similar year Vic would work. Does anyone know, or have recommendations for a single piece driveshaft swap?
Thanks!
Driveshaft for CV rear swap
Moderators: FORDification, 70_F100
-
marvin2
- Blue Oval Fan
- Posts: 536
- Joined: Fri Jan 23, 2009 11:25 am
Driveshaft for CV rear swap
1970 F100 "Marvin 2" - Crown Vic IFS, 302, C4 (work in progress)
1970 F250 "Leonard" - 302, C6 (project in waiting)
1971 F100 "Walt" - 302, 3-speed on the column (Sunday driver)
2004 Mustang GT "Horse With No Name" - 4.6L, 5 speed (Retired daily driver / Friday driver)
-
jbat00
- New Member
- Posts: 5
- Joined: Sat Dec 31, 2011 8:14 pm
Re: Driveshaft for CV rear swap
I used the complete 03 CV drive line including the draft shaft. The wheel base is only .25" shorter than a short bed.