What wheels are you running with your Crown Vic swap?

[BrockGrimes]

What wheels are you running with your Crown Vic swap? Please post pics and spec's. for the front and rear. Also rear axle specs as most swap that also.
This will help me and cut down on duplicate threads.

[derbydad276]

I have mustang (bullit) wheels for mine I used a explorer rear but Im switching it to a Mark VIII

[Rocknthehawk]

Not a dent, but I've posted about the CV swap before. I'm using Airlift Slamair shocks. I haven't cut the inner fenders out but it will lay flat.

22x11 American Racing Daytona wheels, +38 offset in the front. 295/30/22 Nitto tires.

[BrockGrimes]

I'm looking at:
Style: Bullitt
Size: 20x8.5
Finish: Anthracite
Placement: Front and Rear
Centercap Size: Large (2-1/2")
Back Spacing: 6.2" (158mm)
Offset: +38mm (1.5")
Bolt Pattern: 5x4.5" (5x114.3mm)
Weight: 28.8 lbs
Material: Aluminum
Lip Size : 2.5"

Similar to below:

[Broncobilly66]

Bump this to the top.
I'm wheel shopping too. Explorer rear. I'm wanting 20's..

[Madnss]

I'm also wheel shopping. I cant decide if i want 18s on all 4 corners or 20s in the rear and 18s on the front. It seems like 8.5 x 18 or 20 on the front and 10x18 or 20 on the rear are very common. Ive looked at a million pics, but still cant decide want I want to do.

[whiteblur]

I would like to know what wheel back spacing and offset people are using with aftermarket 20s. Just bought a CV front end up having trouble finding that info looking to do the 1.5 drop spring and don't want to run factory wheels.

[BrockGrimes]

Well I opted for these instead:



Spec's:
Wheel Diameter:20 in.
Wheel Width (in):9.000 in.
Backspacing (in):6.770 in.
Offset:+45.00mm