Looking for the front coil spring insulators that go on top of the front coil springs.
Anybody has any, please PM me.
Thanks,
-Bobby.
Coil Spring Insulators
Moderator: FORDification
- BobbyFord
- 100% FORDified!
- Posts: 5372
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
- convincor
- 100% FORDified!
- Posts: 1511
- Joined: Wed Sep 12, 2007 5:05 am
- Location: Connecticut
Re: Coil Spring Insulators
like this? http://www.dearbornclassics.com/60-79-r ... lator.html
Never seen them used on the trucks
Never seen them used on the trucks
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
- BobbyFord
- 100% FORDified!
- Posts: 5372
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: Coil Spring Insulators
Yup, like those
- convincor
- 100% FORDified!
- Posts: 1511
- Joined: Wed Sep 12, 2007 5:05 am
- Location: Connecticut
Re: Coil Spring Insulators
I've got a set on mustang coils next door I'll check diameter and see if same as truck springs
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
- BobbyFord
- 100% FORDified!
- Posts: 5372
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: Coil Spring Insulators
Thanks anyway, but I've already acquired a set.convincor wrote:I've got a set on mustang coils next door I'll check diameter and see if same as truck springs
- convincor
- 100% FORDified!
- Posts: 1511
- Joined: Wed Sep 12, 2007 5:05 am
- Location: Connecticut
Re: Coil Spring Insulators
Cool. They fit?
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
- BobbyFord
- 100% FORDified!
- Posts: 5372
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: Coil Spring Insulators
Actually, did not install them. I cut 1/2 coil off of the Moog CC springs and I want to see how half a coil affects sitting height and camber. The truck is up on jackstands right now because I haven't installed the rotors yet, during the disc swap. I should have it on the ground in the next coming week.convincor wrote:Cool. They fit?