Shifter Knob
Moderator: FORDification
-
Randle
- New Member
- Posts: 221
- Joined: Mon Oct 25, 2004 7:21 pm
- Location: Western Kentucky
Shifter Knob
Got a question, hopefully somebody knows the answer to. I am rebuilding a 71 automatic column. I have a couple of shift levers, one with the lever in good shape the other with the knob it good shape. I have tried wraping the lever in a rag and clamping it in a vice then unscrewing the knob, but when you put pressure on the knob you can see the lever flexing. I know you can buy new knobs so then should come off. Does anyone know if the knob is screwed on or pressed on. Thanks for any help.
Last edited by Randle on Sun Jul 06, 2014 8:35 pm, edited 2 times in total.
-
cep62
- 100% FORDified!
- Posts: 2083
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: Srifter Knob
I believe they are pressed on ,I'm not sure if you can get it off in one piece though.
-
Randle
- New Member
- Posts: 221
- Joined: Mon Oct 25, 2004 7:21 pm
- Location: Western Kentucky
Re: Srifter Knob
Thanks cep62 I put enough pressure on it I was afraid I was going to twist the lever. I may play with one of them and see if I can cut the knob off and just order a new one to replace it.cep62 wrote:I believe they are pressed on ,I'm not sure if you can get it off in one piece though.