adapter availability question

[bumpandsweptline]

I want to remove the 3.03 and install a c/6 . which I just so happen to have a 360&c/6 sitting in my garage !!!does anyone know if there is a adapter for the small block to big block transmission? I'm not having any luck finding anyone that makes one .
70f-100 with a 300 six 3 speed 3.03 transmission.

[tnlprt]

You will need to locate a smallblock C6 case and transfer the guts out of your Big Block case

No adapter was made

[bumpandsweptline]

Thanks for the info . I know I couldn't find nothing . Are the big block and small block trans the same besides the bell housing?

[tnlprt]

The parts interchange from a small block to a fe to a 385 series trans internally

Torque convertors have a different size pilot that goes into the crank

but you can use a 385 torque convertor behind a FE engine with an adapter ring

Edit

Update your profile and

Post your location someone may have a small block trans close to you