1969 f100 parts needed

[DDAN1130]

Hey everyone,
I'm looking for a few things for my 69 F100 4x4... let me know if anyone can help.

radio bezel
fan shroud
tail light trim
west coast JR mirror brackets and mirrors.

thanks all!

[Calfdemon]

I believe I have an extra radio bezel or two... I might also have some tail light trim. How many screw holes in the trim you need? 2 or 3? I will see what I have and send you pictures.

[DDAN1130]

thanks! I found a bezel on ebay but it's a little beat up. could you send a pic of yours and maybe I'll buy it too. the tail light trim has 2 holes, one on top and one on bottom.

[Calfdemon]

Ok... I have been pulling parts for my 69 off the shelves lately and have parts all over the place. As a result, I can't find the taillight trim anywhere. As for the radio bezels... I know I had 3 of them extra and can only find one right now. It is in decent condition EXCEPT, a PO cut about an 1/8th of an inch on each side of the radio face opening to fit a slightly larger aftermarket radio in it. If you are running a stock radio, you are not going to want this bezel. If you are running an aftermarket, I will photo it for you so you can consider it. I know I have at least 2 more bezels somewhere but for the life of me, cannot find them.

[gregamorton]

I have the bezel, set of mirrors and a 390 fan shroud for a 71 truck. I might even have a set of tail light bezels. Ill check tomorrow and get a pic.

[DDAN1130]

Ok... I have been pulling parts for my 69 off the shelves lately and have parts all over the place. As a result, I can't find the taillight trim anywhere. As for the radio bezels... I know I had 3 of them extra and can only find one right now. It is in decent condition EXCEPT, a PO cut about an 1/8th of an inch on each side of the radio face opening to fit a slightly larger aftermarket radio in it. If you are running a stock radio, you are not going to want this bezel. If you are running an aftermarket, I will photo it for you so you can consider it. I know I have at least 2 more bezels somewhere but for the life of me, cannot find them.

thanks for checking. The bezel I ordered from ebay is in pretty good shape, just no chrome left on it. I think I can get by with it and be fine. I've got a retrosound model 2 to run in it so the bezel should stay in pretty stock form.

[gregamorton]

I didnt clean up any thing just wiped the dust off. The mirrors are perfect on the stainless side with no pings. One mirror has something on one head and both are one side and will need to be took apart and changed over. The bezel is nice and the tail light trim is driver quality with one needing a small bend to make it strait. Let me know what you think. My shroud got smashed by doors and grills!!

[Bob67f100]

Was reading your posts. Wondering if you have a rear brake drum for a '67 F-100. Just finished a complete brake job. Had the drums turned but one of the rear drums is too warped to have it turned. Brake shoes are 1 3/4 wide. Thanks.