1967 F-250 Crew Cabs have 1-1/16" kingpins and HD beams.

[guhfluh]

I posted the info on the Fordification Facebook group page about my I-Beam part numbers, hoping Keith could use the info to update the Tech section here. The Tech info shows ALL 67's to have the smaller kingpins, even for F-250's.

I also measured my kingpins today, just to make sure.

So, what I've found out is even for a BASE model 1967 F-250 Crew Cab that got a 240ci six cyl, no power steering or brakes, got 12x2.5" Bendix drums, and the larger HD I-beams with the larger pivot bushings and 1-1/16" kingpins.


http://s321.photobucket.com/user/guhflu ... 2.jpg.html

[Hawkrod]

Every Crew Cab I have had used F350 chassis parts on the front end. I assume this is normal. Hawkrod

[guhfluh]

From what I can tell, yes it is. There wasn't any info out there to support the fact yet.

[Hawkrod]

The master parts catalog does support it as far as I can tell. F250's came with two axle sizes and the beams are marked. If you look up the beams from a Crew Cab or a heavy GVWR truck in the cross reference they come back with the large kingpin. Hawkrod

[guhfluh]

For 1967's?