Where to buy metal brake line kits?

[ajh_71]

Hey all,

I have been looking around for brake line kits for my 1971 f250 2wd long bed. I need the ones that go from the master cylinder since mine have rusted out. Anyone know where to get them? Thanks alot!!

-Austin

[HIO Silver]

Take your pick of Classic Tube or Inline Tube.

You oughtta try getting the required tools and bending up your own. It isn't rocket science....The $75 to $100 investment will last a lifetime. Get the fittings and tubing from Speedway Motors.

[ajh_71]

Awesome, thanks for the advice!

[tbone6]

I got mine from inline, they were perfect.

[Red Mercury]

I had big problems with Classic Tube. I will only order from them again as a last resort. I sent them a set of choke heater tubes from a 1976 F250 to get two sets made. They only sent me one set, but charged me for two. I called them and suggested that instead of a refund I would order a set of brake lines for another truck and I would add $$$ to the credit they owed me. Seemed like a good plan to me and Mike at Classic Tube. Eventually they told me that they didn't have a pattern/CNC pattern to make the lines for a 1967 F100 long box. This dog & pony show went on for several months before we got to the conclusion that they couldn't provide the lines for a very common truck. I was so fed up that I didn't even bother pursuing the initial overcharge for the second set of choke heater tubes that I never received. It was just getting too hard to explain it all to Classic Tube after all the twists & turns in the deal.

One other thing I noticed is that Inline Tube and Classic Tube seemed to have a fairly limited number of models that they supplied lines for. Maybe they have more now than they did 4 years ago. I will have to revisit their websites to see if more models are listed.

[ajh_71]

Thanks for the help guys, really appreciate it