Recently while doing some mods on the 68 I swapped out the steering box and col for one out of a 72. Well I stayed with the 68 steering wheel. Ground down the threads to flush with the hold down nut, and yup horn works if the wheel is turned a quarter turn to the right. Not to safe when doing 70. Turns out I was using the 72 nut and I needed to use the 68 thinner one. Was going to order one but first I went out and put all the original parts neatly on shelves. Yup I found what I needed. Small things make me That is it in front of what I had delivered today along with...oh I will post that one in the tools section.
Keep on Trucking
You do not have the required permissions to view the files attached to this post.
May your sails stay full, and your knots not slip. Unless a slip knot.
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
Turns out I was using the 72 nut and I needed to use the 68 thinner one. Was going to order one but first I went out and put all the original parts neatly on shelves. Yup I found what I needed. Small things make me 
That is it in front of what I had delivered today along with...oh I will post that one in the tools section. 
