I Beam bushing installation
Moderator: FORDification
-
damn_fool
- New Member
- Posts: 14
- Joined: Sun Jan 27, 2013 7:58 pm
- Location: OKC,OK
I Beam bushing installation
I bought new bushings to replace all my front end parts. When I pressed out my I beam bushings I noticed there is a metal sleeve type bushing left. Do I need to get it removed from the I beam as well or can the new bushings be pressed in with them still there?
Jeremy
71 F100 that I haven't got to drive once yet. In pieces in the driveway =(
71 F100 that I haven't got to drive once yet. In pieces in the driveway =(
-
72BahamaBlue
- Blue Oval Fan
- Posts: 663
- Joined: Sat Aug 20, 2011 3:05 am
- Location: Seattle Washington
Re: I Beam bushing installation
The new bushings are used with the old metal sleeves.
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: I Beam bushing installation
Just clean out the inside of the metal sleeve and they slide right in.Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.