240 5 speed swap
Moderators: FORDification, 70_F100
-
tnab1970
- New Member
- Posts: 181
- Joined: Mon Apr 22, 2013 12:48 pm
- Location: Cleburne, Texas
240 5 speed swap
Does any one have any experience swapping a ZF 5 speed ( from 91 f150 & 300 ) into bumpside truck? Were pulling out the three speed and replacing with the five. I pulled eveything I could get off of the 91 doner. Just looking to see if anyone has done this and what are the problem areas. Thanks in advance
-
colnago
- 100% FORDified!
- Posts: 1882
- Joined: Tue Jun 14, 2011 8:48 pm
- Location: Ridgecrest, CA
Re: 240 5 speed swap
What engine do you have in the bump? Will the tranny butt up to it, and bolt up to it?
Joseph
Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
-
tnab1970
- New Member
- Posts: 181
- Joined: Mon Apr 22, 2013 12:48 pm
- Location: Cleburne, Texas
Re: 240 5 speed swap
I have the original 240. Im sure it will bolt up, just looking for problem issues during the swap, Pilot bearing, flywheel bolt pattern, Slave cylinder mounting, clutche pedal issues etc. Any known issues in advance wound be nice.