'67-'72 bumpside parts

danno · Post by **danno** » Tue May 21, 2013 11:08 am

knucklejs wrote:Sorry, but not yet. Was doing storm cleanup all night from the weekend storms that rolled through. It might be another day or two...

no problem, good luck with all that storm stuff. I get enough of that down here !

knucklejs · Post by **knucklejs** » Tue May 21, 2013 3:22 pm

crewcabfan wrote:Location please, also pics of tailgates. Thanks

here's a few pics of the gate I have left. It's pretty straight, has a very slight bow in the top, and 1 small rust pinhole in the very bottom edge

chicof100 · Post by **chicof100** » Tue May 21, 2013 8:27 pm

I sent you a P.M. Iposted on here also. Now I see a picture of the grilles. I want them. [use the PM or e-mail buttons] Robert
Or post some kind of response here. Thank you.

chicof100 · Post by **chicof100** » Tue May 21, 2013 8:29 pm

knucklejs wrote:here's a pic I took yesterday- haven't had a chance to get them down for a closer pic and/or cleaning.....

I want the grilles. Please contact me. [using the PM or EMail buttons] Ask for Robert

knucklejs · Post by **knucklejs** » Tue May 21, 2013 10:23 pm

sorry- still haven't drug them down out of the rafters yet, but hoping to do so over the next few days or so. Easier said than done as I have to move a few dead project vehicle for access! I'll try to post some close up pics as soon as I can. Thx!

guhfluh · Post by **guhfluh** » Fri May 24, 2013 5:20 pm

I got the horn button in today, thanks!

ponyexpress · Post by **ponyexpress** » Fri May 24, 2013 8:51 pm

How much for the 71 manual steering column? Thanks.

knucklejs · Post by **knucklejs** » Sat May 25, 2013 4:12 pm

guhfluh wrote:I got the horn button in today, thanks!

Glad to help! Did you find the cluster gauges you needed- I have those too..

knucklejs · Post by **knucklejs** » Sat May 25, 2013 4:14 pm

ponyexpress wrote:How much for the 71 manual steering column? Thanks.

Took a closer look at it- the shift collar is somewhat hogged out like they normally are and the lower bearing is smoked. If it's still useable for you let me know. Thx

chicof100 · Post by **chicof100** » Sun May 26, 2013 6:31 am

I still want the grilles.

jamieth29 · Post by **jamieth29** » Sun May 26, 2013 12:26 pm

Hey what are you asking for a short box? Pics would be great.

guhfluh · Post by **guhfluh** » Tue May 28, 2013 9:44 am

Thanks for asking! No, I haven't yet. I need to research more on what I need, in order to swap in the gauges. I thought it was only the gauges and sending units, but I'm not certain if the cluster circuit board and associated wiring are different too on my 67. I've been fighting with installing A/C and adapting my stock push/pull bezels and knobs, so everything else has gotten put aside. You can give me a price on what you have though.

chicof100 · Post by **chicof100** » Sat Jun 01, 2013 5:21 pm

knucklejs wrote:here's a pic I took yesterday- haven't had a chance to get them down for a closer pic and/or cleaning.....

How are you doing on these grilles? I want to buy all of them.

72stepside · Post by **72stepside** » Tue Jun 04, 2013 11:43 pm

I could use a good set of armrests for my 71. Black would be preferred but I could dye any color I guess. Shipping to 32570? Shoot me a PM if you gottem!

colnago · Post by **colnago** » Sat Jun 08, 2013 2:34 pm

Horn button came the other day, put it in yesterday. Interior looks so much better!

Thanks,

Joseph

The FORDification.com Forums

'67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts

Re: '67-'72 bumpside parts