I just did a swap on a 67 f100 put a 360 in it...most everything went pretty well except now it won't engage
2nd gear..third and first and reverse all work...it sounds like it is locking in place under the truck..
I have tried to manually put it in 2 and it is there just seems like still in neutral...
When I start it and try to move it when 2 is engaged it behaves like in neutral...
Any suggestions are welcome...I'm at my wits end and wanna get this thing going
1968 360 3speed 2nd won't engage
Moderators: FORDification, 70_F100
-
mmerlinn
- New Member
- Posts: 190
- Joined: Thu Jan 22, 2009 11:45 am
- Contact:
Re: 1968 360 3speed 2nd won't engage
If your transmission worked ok before the swap, all you probably need to do is adjust your linkage. If it did not work ok, it is time to inspect the internals to find the problem.
mmerlinn (http://mmerlinn.com/catalog/makeridx.htm)
"People who are careless and sloppy writers are usually also careless and sloppy at thinking. Answering questions for careless and sloppy thinkers is not rewarding." - Eric Steven Raymond
"People who are careless and sloppy writers are usually also careless and sloppy at thinking. Answering questions for careless and sloppy thinkers is not rewarding." - Eric Steven Raymond
-
Jimmy5150
- New Member
- Posts: 3
- Joined: Sat Jan 26, 2013 4:36 pm
Re: 1968 360 3speed 2nd won't engage
I took it out last nite got wore out so I'm gonna inspect it
I have mixed emotions about floor shift I like the old school traditional shift
I wanna do it right but a hurst is expensive
I have mixed emotions about floor shift I like the old school traditional shift
I wanna do it right but a hurst is expensive