Cant find what i need
Moderators: FORDification, Doug Comer
-
- New Member
- Posts: 14
- Joined: Tue Dec 25, 2012 10:39 pm
- Location: Holler in Va
Cant find what i need
I know there is 100 topics on here about 2x4 to 4x4 conv. But what i need to know is will the raideus armsoff the 4x4 bolt up to my frame, or will my raideus arms bolt to the 4x4 axle? And i have the t-85 3spd with r-11 overdrive, can i use it with a devorced transfer? Any help would be greatl app.
-
- New Member
- Posts: 6
- Joined: Tue Jul 03, 2012 2:03 pm
Re: Cant find what i need
Any thing is possible just depends on skill and patience. Some people call AAA to change a tire, others rebuild leaky carbs on the side of a interstate and don`t flinch. Remember mid 70`s Pathfinder vans used the raduis arm 4x4 conversion so it can be done.
-
- Blue Oval Fan
- Posts: 649
- Joined: Tue Dec 13, 2005 12:38 am
- Location: California, Sonora
Re: Cant find what i need
The two wheel drive radius arms will not bolt to the 4x4 axle. I think the radius arm brackets sit farther forward on the two wheel drive frames also.
Doug
Doug
1967 f100 4x4
1970 f250 4x4
1970 f250 4x4
-
- New Member
- Posts: 14
- Joined: Tue Dec 25, 2012 10:39 pm
- Location: Holler in Va
Re: Cant find what i need
THANKS FOR THE HELP, I KINDA THOUGHT THEY WERE DIFF, BUT WASNT SURE
-
- New Member
- Posts: 27
- Joined: Fri Dec 01, 2006 1:20 pm
- Location: North Carolina, Willow Spring
Re: Cant find what i need
You'd need either all the brackets from a 4x4 or fab them. Would also need to box in the frame. Steering boxes are different. Could find a 4x4 frame much cheaper.