What the heck?
Moderators: FORDification, 70_F100
-
steves67f100
- New Member
- Posts: 6
- Joined: Thu Jun 28, 2012 7:38 am
What the heck?
Does anyone know the name or description of the rubber boot that surrounds the throwout bearing? I'm working on a 1967 F100 2wd V8. Thanks!!!
-
Whateverman
- Blue Oval Guru
- Posts: 1257
- Joined: Sat Jan 08, 2011 6:45 pm
- Location: Comox Valley B.C. Canada
Re: What the heck?
do you mean the rubber boot that goes into the transmission bellhousing which the clutch throwout fork goes thru ? cuz i've never seen a rubber boot surrounding a throwout bearing....
at least not one that was supposed to be there anyways- still got my first first car 20+yrs later : 69 f100 sorta kinda pretending its a Mercury M100 w/a 70 f350 sport custom cab (factory buckets) 67 grille with 69 ranger cooneyes 68 merc box and hood,some supercool fiberglass fenders i scored way back when, 76 f150 disc brake frontend..currently running a 90 5.0HO 4bbl/c4 auto & 3.50 posi...originally a 360/c6 f100 Ranger with dealer added towpack (incl. kelsey hays trailer brake),boxside toolbox,behind the seat stowage & belly tank...only original parts left on 'er are the frame,rear end,rear springs,and rear bumper...
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: What the heck?
because the throwout bearing is by the clutch. I believe most folks call them a CV? 
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
steves67f100
- New Member
- Posts: 6
- Joined: Thu Jun 28, 2012 7:38 am
Re: What the heck?
Thanks guys for replying. It is that rubber piece that is in that bracket on your driveline pic Basketcase. I need to replace that rubber and can't find one... 
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: What the heck?
Steve,
I learn something new every day it still seems. I'd always heard them called "CV joints" way...before any front wheel drive vehicles were even produced. It seems they are called "center support" by the manufacturer. I'd seen one or two guys here replace them "in house" but I'd always let my driveline shop do it as they have to be pressed on as far as I know, (as well as each being different sizes):
http://www.neapco.com/nA-aftermarket-center-support.php
I learn something new every day it still seems. I'd always heard them called "CV joints" way...before any front wheel drive vehicles were even produced. It seems they are called "center support" by the manufacturer. I'd seen one or two guys here replace them "in house" but I'd always let my driveline shop do it as they have to be pressed on as far as I know, (as well as each being different sizes):
http://www.neapco.com/nA-aftermarket-center-support.php
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
steves67f100
- New Member
- Posts: 6
- Joined: Thu Jun 28, 2012 7:38 am
Re: What the heck?
Basketcase, thank you very much for your help, I appreciate it!
Steve
Steve
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: What the heck?
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4